Concrete stitching helps preserve the driving surface

By Priscilla Peterson,
Public Affairs Manager, Southeast Kansas 

KDOT maintenance crews from Independence and Altoona recently took advantage of some mild winter days to perform a preservation activity called concrete stitching on sections of U.S. 400 in Montgomery County. 

The process is used to pin cracks in the driving pavement back together, preventing elevation and separation issues in concrete slabs.

To stitch the pavement, first a crew member measures the crack and paints locations that will be drilled at an angle to the crack. The painted spots are then drilled and cleaned.

Steel pins are placed alongside each drilled location, and epoxy is applied to each hole before the rebar pin is inserted.

Each pin is placed at a 35-degree angle to the crack and hammered into the hole.

Pin securely placed, more epoxy is applied and the hole is smoothed over.

The stitched section is now ready for crack sealing, as shown in a previously stitched and sealed location next to the work zone. And now, on to the next section!